If you want to reinstall your Check'In Pro 2 in another location or if it is not working properly, you have the option to reset it to factory settings. The steps below will guide you on how to proceed:
1 Make sure the Check'In Pro 2 batteries are inserted.
2 Press the button on the right side of the Check'In Pro 2 for about 9 seconds, until the LED lights up red.
3 Once you have released your finger from the button, you will hear a beep, indicating that the reset was successful and that the Check'In Pro 2 will restart.
💡 If you intend to remove the batteries from the Check'In Pro 2, first check that the LED is no longer flashing red. If you remove the batteries too early, the Check'In Pro 2 will not reset correctly, and you will need to repeat steps 1, 2, and 3.
💡 If you wish to continue using your Check'In Pro 2, be aware that it will no longer be functional after resetting. Therefore, double-press the button after it restarts to reactivate it. You will then hear an activation melody.
4 If you did not hear the beep after releasing your finger from the button, repeat the procedure.