If you want to reinstall your Check'In Infra 2 Plus in another location or if it is not working properly, you have the option to reset it. The steps below will guide you through the process:
1 Make sure the batteries are inserted in the Check'In Infra 2 Plus.
2 Press the button located on the right side of the Check'In Infra 2 Plus for about 9 seconds, until the LED turns red. This action will turn off the modem and restart the Check'In Infra 2 Plus.
💡 If you plan to remove the batteries from the Check'In Infra 2 Plus, first make sure that the LED is no longer flashing red. If you remove the batteries too early, the Check'In Infra 2 Plus will not reset properly and you will need to repeat steps 1 and 2.
3 If the LED does not flash red, repeat the procedure.