What is the Check'In Infra 2 Plus alarm for?
The Check'In Infra 2 Plus alarm is a device composed of a connected Check'In Infra 2 Plus unit and a mobile application: Check'In Pro. Equipped with embedded artificial intelligence, the Check'In Infra 2 Plus alarm protects the premises by detecting suspicious vibrations, changes in light, and movements. It alerts you as soon as a break-in occurs.
The Check'In Infra 2 Plus unit is standalone and requires no wiring, electricity, or Wi-Fi. It operates 24/7 and can be installed in the most remote areas where the network is weak (e.g., countryside, basement...) and is compatible with any type of location: telecom rooms, lamp posts...
How does the Check'In Infra 2 Plus alarm work?
The Check'In Infra 2 Plus unit is equipped with a SIM card relying on LTE-M and NB-IoT networks to communicate with the Artifeel server and mobile applications. It operates 24/7, thanks to two CR17500 3V Li-MnO2 batteries with a five-year lifespan.
Using embedded artificial intelligence, the sensors of the Check’In Infra 2 Plus continuously analyse the vibrations affecting the location to be protected. Simultaneously, they monitor the ambient light and detect movements occurring in front of the unit. There is no need to activate or deactivate the alarm; monitoring is constant.
It is possible to customize the alert settings of the Check'In Infra 2 Plus. This way, according to your preference, the Check'In Infra 2 Plus can alert you if two or three events are detected within a two-minute window. You will find more information in this article.
When a break-in attempt is detected, you are notified on your mobile phone (via the app you downloaded and/or by SMS and/or by email). The Check’In Infra 2 Plus can also be connected to a monitoring center or an internal supervision center.
What are the differences between the Check'In Infra 2 Plus alarm and the Check'In Infra alarm?
The Check'In Infra 2 Plus alarm offers significantly superior performance compared to its predecessor, the Check'In Infra. It has better battery life thanks to its 4 batteries and new components that extend the battery life. Its connectivity has also improved, with three major innovations: Power Saving Mode (PSM), an external dual SIM device, and an external antenna.
The PSM speeds up the connection to the network, thus reducing the data transmission delay and, consequently, the alerts. With the dual SIM, the Check'In Infra 2 Plus can connect to two different telecom operators. The dual SIM and external antenna ensure extended network coverage, even in the most isolated areas.
To view the complete comparison table of Check'In models, click here.
Installing the Check'In Infra 2 Plus alarm
Installing the Check'In Infra 2 Plus alarm takes less than three minutes. Simply download the Check'In Pro app, then follow the displayed instructions. Then screw your Check'In Infra 2 Plus unit into the location to be protected.
You will find all the steps to follow during installation in the following article:
Technical specifications of the Check'In Infra 2 Plus
- Sensors: Accelerometer, gyroscope, magnetometer, light sensor, PIR sensor
- PIR sensor field of view: 130°
- Connectivity: LTE-M, NB-IoT, and BLE (Bluetooth Low Energy)
- Power supply: 4 x 3V Li-MnO2 17500 batteries
- Battery life: 5 years
- IP68
- Dimensions: 195mm x 92mm x 62mm
- Weight: 400g with batteries