What is the "Secure access" detection mode?
The detection modes of the Check'In are usually divided into four categories: Standard; Enhanced detection; Real time; Detection Disabled. If you have an access badge, you also have a fifth detection mode: the "Secure access" mode. With this mode, any opening of the entrance will be considered an intrusion if no access badge is detected nearby. You will then be automatically notified of the unauthorized opening.
To learn more about the Bluetooth access badge, click here.
How to activate the "Secure access" detection mode?
You must first install a Bluetooth access badge. Then, you need to link this access badge to the Check'In you are interested in. You will find all the steps to follow in this article. Then go to your Check'In or Check'In Pro app.
On the Check'In app
Find the Check'In you are interested in the "Devices" menu of the app. Then tap on the sensor card, then on the "Settings" tab. Select "Detection Modes", then tap the circle located to the left of "Secure Access". Finally, tap the "Validate" button. The detection mode will be updated during the next performance check. If you wish, you can triple-tap the button located on the right side of the Check'In to force a connection and immediately apply the new settings.
On the Check'In Pro app
Go to the "Search" menu of your app, then find the Check'In you are interested in. Then tap on the sensor card. Select "Settings", then "Detection Mode". Tap the circle located to the left of "Secure Access Badge", then tap the "Validate" button. The detection mode will be updated during the next performance check. If you wish, you can triple-tap the button located on the right side of the Check'In to force a connection and immediately apply the new settings.