Skip to main content

Navigating in the profile of a Check'In

  • Updated

"Summary" Tab

The main page of the Check'In profile is the "Summary" tab. In the left column, you will find: the Check'In name; its IMEI; its status; the organisation it belongs to; its address; the Check'In model; its installation date; the installer's name.

In the central column, the following information is available: 

  • Signal Strength: signal quality.

  • Battery state: Check'In battery level.

  • Firmware: Check'In software version.

  • Connectivity: LTE-M or NB-IoT networks.

  • Operator: operator currently used by the device (Orange, Vodafone...).

In the right column, you can access the different tabs of the Check'In profile.

 

"Badges" Tab

Here you will find all the badges associated with the Check'In. You can associate new ones by clicking the "Associate a badge" button. To unassign badges, click the "Select" button, select one or more badges, then click "Unassign". 

 

"Events" Tab

All events reported by the Check'In (function checks, alerts, etc.) are displayed here. You can filter them by clicking the "Filter by" button. The "Export" button allows you to export the Check'In events in CSV format.

 

"Contacts" Tab

Here you will find all the Check'In's emergency contacts. These contacts are alerted by SMS and/or email. You can add an emergency contact by clicking the "+ Add an emergency contact" button. The maximum number of emergency contacts is three. To edit one, click on it.

 

"Settings" Tab

"Settings" Tab

The "Settings" tab allows you to modify the Check'In's settings. You can: change the Check'In's name; alert settings; sensitivity settings; motion detector settings (for Check'In Pro 2 and the Infra range); uninstall and/or suspend the Check'In.

 

Depending on your Check'In model, you can adjust: 

  • Siren: the alarm that sounds in case of an attempted or detected intrusion.

  • Audio recording: before the Check'In's alarm goes off, it records a 15-second audio clip.

  • 15-second delay: the time between the Check'In warning intruders that the site is protected and when the alarm goes off (the delay is automatically enabled if audio recording is enabled).

  • Test mode: if enabled and the Check'In's alarm is triggered, you can disable it by pressing the device's button once. 

  • Sensitivity: the sensitivity of the Check'In's sensors (we recommend not changing it unless advised by Artifeel customer service).

Also, depending on your Check'In model, you can modify: 

  • Delay after opening: the time during which the motion detector remains disabled after the door is opened.

  • Detector sensitivity: the sensitivity of the motion sensors (we recommend not changing it unless advised by Artifeel customer service).

💡 Remember to click the "Save" button(s) to save the parameter changes! 

 

The danger zone allows you to uninstall your Check'In or suspend it.

 

"Detection mode" Tab

You can change the Check'In's detection mode in this tab. 

 

"Calendar" Tab

You can schedule a new recurring or occasional detection mode in the "Calendar" tab.

💡 This feature is currently not available for the Infra range, but will be soon.

 

"Telemonitoring" Tab

The "Telemonitoring" tab allows you to activate the remote monitoring service you have subscribed to, or, conversely, to deactivate it.

 

"Address" Tab

If you made a mistake in the Check'In's address during its installation, you can correct it in this tab. 

❗ If your Check'In is linked to a telemonitoring service, modifying the address in this tab is not enough. The new address will not be sent to the monitoring center. You will need to completely uninstall the Check'In, then restart the installation from the beginning.

 

"Lifecycle" Tab

The "Lifecycle" tab allows you to view the history of changes made to the Check'In, with the exact date and time of each change. You can also see who made these changes. For more information about this tab, click here.

 

"Diagnostic" Tab

The "Diagnostic" tab contains detailed information about the status of your sensors and their network. You can find more details about this tab by clicking here.

 

Related articles